-
General FAQ
-
PTZ Camera
-
- How to find PTZ IP address
- How do I change the IP address of PTZ Camera?
- How do I set the PTZ camera to be on my network?
- How do I connect Mac PC to the PTZ camera?
- Does this camera need the power adapter if I use a POE switch？
- How to restore camera's default IP address，username and password in IR remote control
- How to restore factory defaults
- How to use PTZ NDI Camera connect Skype, Zoom
-
- IR remote control shortcuts
- What are the possible ways I can control my PTZ camera?
- Installing the OBS plugin to your windows PC to control PTZ camera by OBS
- How to control your PTZ cameras by vMix
- How to get PTZ NDI Camera working in NDI
- How to control PTZ Camera by ZowiePTZ
- If I set a preset using the remote control, can I call that preset from the IP interface?
- How to use STREAM DECK to control the PTZ camera
- How to control PTZ camera by BITFOCUS Companion
- Supporting Xbox Joystick control
- How to set VISCA/Pelco-D/Pelco-P protocol at PTZ controller and PTZ camera
-
- How to get PTZ cameras working in the OBS
- How to get PTZ cameras’ videos in vMix
- How to feed RTSP from ZOWIETEK PTZ cameras into some commonly used video mixing software (OBS, vMix)
- RTMP live streaming to YouTube with PTZ camera
- RTMP live streaming to Facebook with PTZ camera
- How do I stream to YouTube live with vMix?
- How do I use OBS to push streams?
- How do I use vMix to pull RTSP streams?
- How to pull stream through RTSP(VLC)
-
Streaming Encoder
-
- How to get a RTMP(S) URL?
- How to update the firmware?
- What cameras are compatible with the LiveV400?
- What platforms can I stream to with LiveV400?
- What to do if the video is not clear
- Is the LiveV400 supposed to run hot?
- The sound of the fan of LiveV400 affected me, how to solve this problem
- Does the LiveV400 support OSD?
- Is device video collage supported?
- How to get LIveV400’s Serial Number
- What resolutions and framerates can the LiveV400 stream?
-
- Which bands（frequencies） does the LiveV400 support?
- Which 4G（LTE）USB dongle does the LiveV400 support?
- How to connect the LiveV400 to the internet
- The most important step to use the built-in 5G/4G(APN setting)
- How to bond
- How to aggregate the network to make the live more smooth
- Preparation before pushing the stream
- Can the LiveV400 stream to multiple destinations at once?
- How to use SIM card to connect to the network?
-
Medical Video Recorder
-
- What are the recommended USB device specifications?
- How to set the MediDVR clock
- Set the size and time of video clips
- How to capture the still images during video recording
- How to manually select the video source
- How to select the audio source
- How to playback the videos just recorded or stored on the MediDVR
- How to pull stream to view live video
-
- Brief description of the MediDVR
- How can I search patient data?
- Is it possible to playback / edit the video file on a computer?
- Troubleshooting
- How to find the version information on the MediDVR
- Output formats supported by the MediDVR
- Set up the video input and resolution on the MediDVR
- What video resolutions are supported?
-
-
AI PTZ Camera
-
- How to find PTZ IP address?
- How to restore factory defaults
- How to restore camera’s default IP address，username and password?
- How to use PTZ NDI Camera connect Skype, Zoom
- Which video formats does PTZ compatible with BlackMagic devices?
- AI PTZ Camera（1080P Version) - HDMI & SDI output delay
- How to upgrade the firmware at MAC OS?
- How to update the new firmware
- Does AI Tracking Camera supports ZowiePTZ？
-
PTZ Controller
-
- Quick Start
- Setting up your PTZ Network Controller
- How to search the camera by ONVIF
- How to set preset and call preset?
- How many presets (max) per camera can you set up?
- Can the controller be turned off when using POE?
- When the PTZ camera is mounted on the ceiling, I go right with the joystick the camera goes left and when I push the joystick to the left it goes. How can I fix this problem?
- Will this viewer work with 4k camera system?
- Does this controller support VISCA over IP ?
- Does the RS232 and RS485/422 work on this controller?
- Can the gateway IP address be changed?
- I tried to connect in the network but the Gateway IP address and DNS server could not be changed. Could you tell me how to change them?
< All Topics
Print
How to control PTZ camera by BITFOCUS Companion
Table of Contents
