` How to control and command the MediDVR remotely - Zowietek Electronics, Ltd.
How can we help?

Welcome to Zowietek Support!

Popular searches: PTZ Camera, LiveV400, GeneralFAQ

< All Topics

How to control and command the MediDVR remotely

First, the MediDVR should be connected to the network.

If you use the LAN, you can get the IP address as seen below.

Or you can use the Wi-Fi to connect to the Internet.

Press the ‘Scan’ and choose the Wi-Fi you want to connect.

Now you can get the IP address.

Open web browser, type IP address and then go to the control page.

Of course, you can use your mobile phone to scan the QR code to control the MediDVR.

Previous How to control surgical / PTZ camera by MediDVR
Next How to use the remote control (a hand-remote / a foot-pedal) to control the MediDVR recording
Table of Contents
Copyright © 2016 Zowietek Electronics, Ltd. All rights reserved.  Privacy Policy