How to control surgical / PTZ camera by MediDVR
1. The desktop MediDVR (SKU: 30431-010) is connected via RS232 to the surgical Camera/PTZ Camera.
2. Start the MediDVR, after the UI starts, press the control panel button “CAM”, you can control the camera P/T.
Note: The Surgical Camera does not have a P/T function, only zoom function.
The LCD screen is displayed as shown in the figure:
Press the “PLAYBACK” key (UP ARROW) as shown in the following figure:
Press the “INPUT” key (DOWN ARROW) as shown in the following figure:
Press the “STORAFGE” key (RIGHT ARROW) as shown in the following figure:
Press the “CAM” key (LEFT ARROW) as shown in the following figure:
3.Press the “OK” key to control ZOOM as shown in the following configure.
Press the “CAM” key (LEFT ARROW) to control ZOOM speed- as shown in the following figure:
Press the “STORAGE” key (RIGHT ARROW) to control ZOOM speed+ as shown in the following figure:
Press the “PLAYBACK” key (UP ARROW) once to control ZOOM plus ’1’ as shown in the following figure:
Press the “INPUT” key (DOWN ARROW) once to control ZOOM minus ‘1’ as shown in the following figure:
