WARNING: Don’t move or rotate the camera by seizing the camera head.
First connect the "HDMI output" as the diagram to video monitor.
Next you will need to connect the power supply.
You can see the camera starts rotating to its default parking position of front middle...
You can restore factory defaults in the following ways:
Note: The two ways are completely independent. The IR remote can only restore the settings changed through the IR remote, not the settings changed on the web. But the camera’s web interface can restore the settings changed through the IR remote and the settings changed on the web...
You can use IR remote: press “MENU” →（P/T/Z）→ "Zoom speed", you can set speed from 1 to 8...
You can use the IR remote: Press [*] + [#] +[MANUAL]
Open web browser, type camera’s IP address to go to the camera login page. Log in to the camera’s web interface.
You can see the IP address, username and password have been restored.
Note: It only resets the administrator's username and password, not the normal user's username and password...