` IR remote control shortcuts - Zowietek Electronics, Ltd.
How can we help?

Welcome to Zowietek Support!

Popular searches: PTZ Camera, LiveV400, GeneralFAQ

< All Topics
Print

IR remote control shortcuts

Here are current PTZ camera IR commands that can be done from the supplied IR remote control

1. Standby Key

After 3s long press, the camera will step into standby mode. Long press 3s again, the camera will self- check again and back to HOME position.

2. Camera Address Selection

Select the camera address to control.

3. Number Key

Set or run 0-9 presets.

Press a number key 0-9 directly to run a relative preset.

4. */# Key

Key combination use.

5. Focus Control Key

Auto Focus: Enter auto focus mode.

Manual Focus: Enter manual focus mode. Switch the camera focus mode to manual focus by pressing [+] or [-] to adjust.

Focus(near): Press [+] key (Valid only in manual focus mode)

Focus(far): Press [-] key (Valid only in manual focus mode)

Press and hold the key, the action of focus will keep continue and stops as soon as the key is released.

6. Zoom Control Key

Zoom +: Lens near (Zoom in)

Zoom -: Lens far (Zoom out)

Press and hold the key, the camera will keep zooming in or out and stops as soon as the key is released.

7. Set/ Clear Preset key

Set Preset: Set a preset position the users should press the [SET PRESET] key first and then press the number key 0-9 to set a relative preset.

Clear Preset key: Clear a preset position, the user can press the [CLEAR PRESET] key first and then press the number key 0-9 to clear the relative preset.

Note: 10 preset positions in total are available by remote controller. Press the [#] key three times continually to cancel all the preset.

8.Pan/ Tilt Control Key

Press ^ Key: Tilt up

Press v Key: Tilt down

Press < Key: Pan left

Press > Key: Pan right

[HOME] Key: Return to the middle position or enter the next level menu

Press and hold the up/ down/ left/ right key, the pan/ tilt will keep running until it runs to the end point and the pan/ tilt running stops as soon as the key is released.

9. BLC Control Key

Back Light ON OFF: Turn on or off the back light.

10. Menu Setting

Enter/ Exit the OSD menu or return to the previous menu.

11. Camera IR Remote Control Address Setting

[*] + [#] +[F1]: Camera Address No.1

[*] + [#] +[F2]: Camera Address No.2

[*] + [#] +[F3]: Camera Address No.3

[*] + [#] +[F4]: Camera Address No.4

12. Key Combination Function

[#] + [#] + [#]: Clear all presets

[*] + [#] + [6]: Restore factory defaults

[*] + [#] + [9]: Flip switch

[*] + [#] +[AUTO]: Enter into the aging mod

[*] + [#] + [3]: Menu set to Chinese

[*] + [#] + [4]: Menu set to English

[*] + [#] +[MANUAL]: Restore the default username, password, and IP address

[#] + [#] + [0]: Switch the video format to 1080P60

[#] + [#] + [1]: Switch the video format to 1080P50

[#] + [#] + [2]: Switch the video format to 1080I60

[#] + [#] + [3]: Switch the video format to 1080I50

[#] + [#] + [4]: Switch the video format to 720P60

[#] + [#] + [5]: Switch the video format to 720P50

[#] + [#] + [6]: Switch the video format to 1080P30

[#] + [#] + [7]: Switch the video format to 1080P25

[#] + [#] + [8]: Switch the video format to 720P30

[#] + [#] + [9]: Switch the video format to 720P25

Next What are the possible ways I can control my PTZ camera?
Table of Contents
Copyright © 2016 Zowietek Electronics, Ltd. All rights reserved.  Privacy Policy