` How to control surgical / PTZ camera by MediDVR - Zowietek Electronics, Ltd.
How can we help?

Welcome to Zowietek Support!

Popular searches: PTZ Camera, LiveV400, GeneralFAQ

< All Topics
Print

How to control surgical / PTZ camera by MediDVR

1The desktop MediDVR (SKU: 30431-010) is connected via RS232 to the surgical Camera/PTZ Camera.

2. Start the MediDVR, after the UI starts, press the control panel button “CAM”, you can control the camera P/T.

Note: The Surgical Camera does not have a P/T function, only zoom function.

The LCD screen is displayed as shown in the figure:

Press the “PLAYBACK” key (UP ARROW) as shown in the following figure:

Press the  “INPUT” key (DOWN ARROW) as shown in the following figure:

Press the “STORAFGE” key (RIGHT ARROW) as shown in the following figure:

Press the “CAM” key (LEFT ARROW) as shown in the following figure:

3.Press the “OK key to control ZOOM as shown in the following configure.

Press the “CAM” key (LEFT ARROW) to control ZOOM speed- as shown in the following figure:

Press the “STORAGE” key (RIGHT ARROW) to control ZOOM speed+ as shown in the following figure:

Press the “PLAYBACK” key (UP ARROW) once to control ZOOM plus ’1’ as shown in the following figure:

Press the “INPUT” key (DOWN ARROW) once to control ZOOM minus ‘1’ as shown in the following figure:

Next How to control and command the MediDVR remotely
Table of Contents
Copyright © 2016 Zowietek Electronics, Ltd. All rights reserved.  Privacy Policy