| |
 |
| |
|
|
| |
 |
DVB SDK allows an application to control the tuner and set PIDs in order to route received information to the correct place. In the SDK there are three main functional categories of control: Tuner control and tuner module monitoring; Audio/Video stream control, and; IP Data/MAC control and monitoring. These are represented by three respective interfaces. The customer application sets the tuner and PIDs via the SDK's DirectX filter and its filter interfaces. The particular SDK method for setting PIDs determines whether the stream will be treated as Audio, Video, Raw TS, or IP data. The SDK communicates with driver. When received, Audio, Video or Raw TS are directed to the customer application through the DirectX filter, while IP (Internet Protocol) data is typically directed (see AddIpPIDs method) to the customer's IP application via the socket using the standard IP protocol stack. Alternatively, IP data or any data/media contained within a raw transport stream may be directed through the DirectX filter to the customer application.
*Some features and specifications are hardware dependent. Please refer to hardware specification.
|
 |
|
|
 |
|
Reception of digital DVB television, radio channels and teletext |
 |
Reception of data services via broadband cable or satellite |
|
Supports DVB, ETSI, TCP/IP and MPEG-2 |
|
Allow for immediate assessment of quality receiving signal |
|
Multiple transponder switching, Section packing and interleaving |
|
Reception of digital DVB television, radio channels and teletext |
|
Ensures interoperability across different head-end equipment, OS |
|
Patent-pending FlexParser™ (PID filtering, IP unicast/ multicast filtering, MAC filtering) |
|
Simple to install plug-and-play technology with an easy configuration menu |
|
Optional conditional access : fixed-key CA, smart-card CA, DVB CI based CA |
|
Support Windows 98/Me/NT/2000/XP |
|
 |
Frontend |
RF |
50-860MHz |
| Demodulation |
QAM 16/32/64 optional |
| Bandwidth |
8MHz(PAL), 6MHz(NTSC) |
| Symbol Rate |
1-7.0MS/s(8MHz), 1-5.3MS/s(6MHz) |
| RF Level |
-62 to -25 dBm |
|
Decoding |
ISO/IEC 13818-2 MPEG-2 MP@ML |
| Filter |
PID: 39, MAC: 33, Section: 33 |
| Compliance |
EN 301 192 DVB Data Broadcast EN 301 192 |
| ISO/IEC 13818 -1, ISO/IEC 13818 -6 |
| ETSI EN 301 192 V1.1.1 |
| Transport Dmux |
Simultaneous PID Filtering, MAC Filtering,
IP Unicast/Multicast Filtering, Section Packing, Interleaving |
| Teletext |
ETS 300 706 DVB/VBI |
Decoding |
Video |
ISO/IEC 13818-2 MPEG-2 MP@ML |
| Audio |
ISO/IEC 13818 -3 MPEG-1 Layer 1 & 2, MPEG-3 |
Protocol |
Unicast |
PPP Authentication: RFC1631 IP-in-IP, Proxy, VPN |
| Multicast |
IGMP, RFC1112 |
Interface |
PCI |
Rev 2.1 |
| RF |
IEC 75ohm(PAL), F 75ohm(NTSC) |
| Remote Control |
Full function remote control, optional |
Software |
Driver |
WDM |
| Application |
TV4PC for Windows 98/Me/2000/XP |
PC |
CPU/Memroy |
Pentium III 600/128M above |
| OS |
Windows 98/Me/NT/2K/Windows XP |
|
 |
| |
| |
|
|
| |
|
|
|
 |
